Features
Instek GRS-6052A 50 MHz 2 Channels Real Time Analog and Digital Storage Oscilloscope. New in Box.
The GRS-6000A Series is a Real-Time/Digital Storage Oscilloscope, which provides both analog and digital storage features in one product. When original signals are correctly represented and quickly updated, the GRS-6000A Series also allow simultaneously saving the waveform. With Equivalent Time Sampling at 500MSa/s, the GRS-6000A Series are capable of reconstructing repetitive waveforms up to 50MHz/30MHz in an accurate and detailed fashion. The waveform storage could be done just by pressing the RUN-STOP button, or through the Single Trigger mode which captures single-shot events. 10 Reference Waveforms can be saved and recalled for comparing waveforms. Numerous functions such as Average, Pre-Trigger, Roll mode, Peak Detect, Envelop, Persistence, and X-Y mode are available to fit in various measurement applications. The RS-232C Interface and the free Remote Control Software enable monitoring, remote controlling, and storing waveforms in PC.
|
FEATURES |
DC~50MHz Bandwidth, 100MSa/s, 2kW/CH x 2
Equivalent Time Sampling of 500MSa/s max.
Acquire Mode : Peak Detect, Envelop, Persistence
Pre-Trigger Function 0 ~ 10 div
ROLL Mode to 100s/div
Waveform SAVE/RECALL 10 sets (REF0~REF9)
Averaging Function (2 ~ 256)
Smoothing Function ON/OFF
Max. Sweep Rate 10ns/div
ALT-MAG Function (x5, x10, x20)
Cursor Readout Function: V, T, 1/ T
Panel Setting SAVE/RECALL 10 sets (M0~M9)
VERT Mode Triggering
RS-232C Interface |
|
CRT
|
Type and Acceleration
|
6-inch CRT, 10kV |
| Illumination |
Front panel control |
| Z-axis Input |
Sensitivity : at least 5V
Polarity : positive going input decreases intensity
Max. input voltage:30V(DC+ACpeak)
Input Impedance : approx. 33k |
|
VERTICAL SYSTEM
|
| Deflection Coefficient and Accuracy |
1mV ~ 2mV/div }5%,
5mV ~ 20V/div }3%,
14 steps in 1-2-5 sequence |
| Variable Continuity |
2.5 : 1 ~ min. 50V/div |
| Bandwidth (-3dB) |
1mV ~ 2mV/div: DC~7MHz
5mV ~ 20V/div: DC~50MHz |
| Vertical Mode |
CH1, CH2, DUAL (ALT or CHOP) |
| Chopper Frequency |
Approx. 250kHz |
Sum or Difference
|
CH1+CH2, CH1-CH2 |
Invert
|
CH2 |
Input Impedance
|
1M }2%//approx. 25pF |
Input Coupling
|
AC, DC, GND |
Input Voltage
|
Max. 400V(DC+ACpeak) |
|
HORIZONTAL SYSTEM
|
Sweep Time
|
0.2s/div ~ 0.5s/div, 20 steps |
| Variable Continuity |
2.5 : 1 up to 1.25s/div (uncal.) |
Accuracy
|
}3%, }5% at x5/ x10MAG. }8% at x 20MAG |
Sweep Magnification
|
x5, x10, x20 |
| Max. Sweep Time |
20ns/div (10ns/div uncal) |
| ALT-MAG Function |
Yes |
| HOLD-OFF Time |
Variable |
|
TRIGGER
|
Trigger Mode
|
AUTO, NORM, TV |
Trigger Source
|
VERT, CH1, CH2, LINE, EXT |
| Trigger Coupling |
AC, HFR, LFR |
Trigger Slope
|
g+horg - hpolarity |
ALT Trigger
|
Yes |
| Indicator Trigger LED |
Yes |
TV Sync. Separator
|
TV-Vg-h, TV-Hg - h |
Trigger Sensitivity
|
| GRS-6052A |
20Hz~5MHz |
5MHz~40MHz |
40Hz~50MHz |
| CH1, CH2 |
0.5div |
1.5div |
2.0div |
| Vert-Mode |
2.0div |
3.0div |
3.5div |
| EXT |
200mV |
800mV |
1V | |
|
TV sync. pulse more than 1 div or 200mV (EXT) |
External Trigger Input
|
Input impedance :Approx. 1M//25pF (AC coupling)
Max. input voltage : 400V (DC + ACpeak) |
|
X-Y OPERATION
|
Input
|
X-axis : CH1 ; Y-axis : CH2 |
| Sensitivity |
1mV/div ~ 20V/div |
| Bandwidth |
X-axis : DC ~ 500kHz (-3dB) |
| X-Y Phase Shift |
<3 from DC ~ 50kHz |
|
DIGITAL STORAGE
|
Acquisition Digitizer
|
8 bit ADC x 2 |
Max. Sampling Rate
|
500MSa/s for equivalent time sampling
100MSa/s for normal sampling |
| Storage Bandwidth |
Single shot: DC ~ 25MHz
Repetitive: DC ~50MHz |
| Dynamic Range |
}5div |
Memory Length- Acquisition Memory
|
2k words/CH x 2, 1k words/CH(equivalent) |
Memory Length- Save REF Memory
|
1k words/CH x 10 with back-up memory (REF0~REF9) |
| Memory Length- Display Memory |
1k words/CH x 4 waveform(max.) |
| Sweep Time |
Equivalent: 0.2s/div ~ 0.5s/div
Normal Sample: 1s/div ~ 0.1s/div
Roll: 0.2s/div ~ 100s/div |
| Sweep Magnification |
x 5, x 10, x 20 |
Max.Sweep Time
|
10ns/div |
| MAG Interpolation |
DOTS, LINEAR |
| ALT-MAG Function |
Yes |
Acquire Mode
|
Sample, peak detect(>25ns), Envelop. Persist, Average(2~256) |
| Operation Mode |
Auto, Norm, Single, Single-roll, Roll, X-Y, Run/Stop |
| Smoothing Function |
Dot joint ON/OFF selectable |
Pre-Trigger
|
Pre-trigger 0 ~10div in 0.02div steps |
| X-Y Operation |
X-axis: CH1 Y-axis: CH2 |
| Storage Bandwidth |
DC~50MHz(-3dB) |
| Display Resolution |
H: 100points/div; V: 25points/div;
X-Y: 25 x 25 points/div |
| SAVE/RECALL |
|
| Panel Setting |
10 sets(M0 ~M9) |
Waveform
|
10 sets(REF0~REF9) |
| READOUT & CURSOR |
|
| Cursor Measurement |
V, T, 1/ T |
Readout Intensity
|
Adjustable |
| OUTPUT SIGNAL |
|
| CH1 Signal Output |
Voltage : approx. 20mV/div (with 50 terminated)
Bandwidth : 50Hz ~ 5MHz |
Calibrator Output
|
Voltage : 0.5V}3%
Frequency : approx. 1kHz, square wave |
| INTERFACE |
|
|
RS-232C |
POWER SOURCE
|
|
|
AC 100V/120V/230V}10%, 50/60Hz |
|
ACCESSORIES |
|
User manual x 1
Power cord x 1
GTP-060A-4 Probe (10:1/1:1) x 2 |
| DIMENSIONS & WEIGHT |
|
|
275(W) x 130(H) x 370(D) mm
Approx. 8.5kg |
|
