• 15 MHz Sweep And Multiburst

Frequency range and level for video sweep and multiburst can

be narrow or wideband from 100 kHz to 15 MHz. There are six

& seven sweep markers respectively in bands 1 and 2. Markers

can be toggled on and off. In multiburst the last burst is variable

with the jog dial.

• Genlock

Genlock function enables generator synchronization with

another pattern generator.

• 100 Programmable Presets

Sync, burst (NTSC and PAL), luminance, chrominance (SECAM

system: subcarrier level variable), and setup (NTSC) levels

can be changed independently or ganged for any pattern and

stored. Up to 100 front panel settings can be stored and recalled

from memory with battery back-up.

• Composite, Y/C, RGB, Y/R-Y/B-Y Outputs

Separate video output signals composite video, RF, 2 black

burst signals (NTSC & PAL), H and V drive sync signals and

composite sync signals.

• Special Functions

There are 13 basic patterns including SMPTE color bars and

convergence patterns. Luminance, chrominance, and RGB

signals can be turned on and off. Circle pattern superimposition

and moving marker synthesized functions can be used with the

basic pattern to generate various patterns. (SECAM system: no

DEM pattern)

• VHF/UHF/Cable R-F Coverage With Lookup Table Charts

RF output covers VHF, UHF and Cable TV channels including

most of the necessary broadcast channel data.

• VHF/UHF RF Modulator Accepts Internal And External Video

& Audio Modulation

The RF signal can be modulated with internal test patterns and

audio signals, as well as external video and sound signals.

• Sound Modulation

Audio modulation with 400 Hz or 1 kHz can be applied to the RF

output. The 400 Hz and 1 kHz audio tones are also available as

outputs to check audio circuits.

• GPIB

The GPIB interface is available as a factory option.