View CartMy Account / Order StatusHelp
Search
HACKER SAFE certified sites prevent over 99.9% of hacker crime.
Credit Card Services




Navigation

  Home > Power supplies > DC power supplies >

  Sorensen XG6-110 Programmable DC Power Supply, 0-6V, 0-110A, 670W.
  Sorensen XG6-110 Programmable DC Power Supply, 0-6V, 0-110A, 670W.
Sorensen XG6-110 Programmable DC Power Supply, 0-6V, 0-110A, 670W.
  
Our Price: $1,299.00


Availability: Usually Ships in 6 to 8 Weeks
Product Code: XG6-110


XG 850 Options: 		MEA Ethernet Option (Can not be combined with MGA) [Add $545.00]
MGA GPIB Option (Can not be combined with MEA) [Add $545.00]
RM-D-XG1 Dual Rackmount [Add $50.00]
RM-S-XG1 Single Rackmount [Add $100.00]
RM-XG1 Rackmount Rails [Add $50.00]

 
Features
 
 
Features

This Product is for sale in US Border Towns, Mexico and Central America

  • Highest Power Density
    High frequency, soft switching technology in the XG Series provides up to 850 Watts in a 1U half-rack package. This represents the highest power density available from any manufacturer. With 12 models, there is a configuration available to meet every application.

  • Comprehensive Digital and Analog Interface Options
    The XG comes standard with USB 2.0, RS-232, RS-485, isolated and non-isolated analog interfaces to provide a comprehensive set of options to connect to a PC or other network device. This design provides the convenience
    of being able to accommodate a wide range of installation configurations. Ethernet and GPIB interfaces are available as options.

  • Scalable, Multi-Unit Design
    XG power supplies can be connected in parallel or series to produce greater current or voltage output for your applications. This scalability allows you to build rack-mounted systems with the XG that exactly meet your existing requirements, while allowing for future expansion.

  • Multi-Channel Support
    Up to 30 XGs can be connected easily via an RS-485 bus to provide the ultimate flexibility in remote programming. This eliminates the cost and complexity of requiring GPIB cards in each unit Once connected, multiple power supplies can be controlled via a single LAN, USB 2.0, GPIB, RS-232 or RS-485 interface. This provides an efficient option to centrally manage each XG needed for your applications.

  • Straightforward Front Panel Controls
    The XG is equipped with a unique push-button encoder and function selector dial to provide a simple, uncluttered front panel. Both voltage and current can be set quickly and easily using these two controls. Front panel access can be locked out to ensure secure remote operation. This streamlined front panel layout results in fast, intuitive set-up and operation of the XG.

  • High Reliability
    To guarantee long-term trouble-free performance, the XG was designed with reliability in mind. Soft-switching technology ensures higher mean time between failure (MTBF) by eliminating high voltage transients found in conventional hard-switching power supplies which can cause premature failure of power components.
    Xantrex engineers also rigorously tested the XG during the design phase using Highly Accelerated Life Testing (HALT). This rigorous test procedure combines powerful thermal and vibration technologies to stress a product beyond its rated specifications. HALT testing allows our engineers to uncover and correct design issues early in the development cycle. This care in design and comprehensive testing ensures the XG exceeds the reliability and quality standards of both Xantrex and our customers.

  • Five-Year Warranty
    The XG is backed by a comprehensive five-year warranty, the longest in the market. Our superior design and testing techniques result in highly reliable products that will provide you with years of trouble-free performance.
     
    Output
    Output Voltage1
    6 V
    Output Current2
    110 A
    Output Power3
    670 W
    Line Regulation
    Voltage (0.005% of rated output
    voltage +2 mV)4
    2.3 mV
    Current (0.01% of rated output
    current +2 mA)5
    13 mA
    Load Regulation
    Voltage (0.005% of rated output
    voltage + 2 mV)6
    2.3 mV
    Current (0.02% of rated output
    current +5 mA)7
    27 mA
    Output Noise (rms, 300 kHz)
    Voltage
    8 mV
    Current8
    200 mA
    Output Ripple (p-p, 20 MHz)
    Voltage
    50 mV
    Maximum Recommended Remote Sense Line Drop Compensation per Line9
    1 V
    Up-prog. Response Time, 0~Vmax10
    60 ms
    Down-prog. Response Time: Full Load
    50 ms
    Down-prog. Response Time: No Load
    300 ms
    Over-Voltage Trip Point
    0.5–7.5 V
    Efficiency11
    75/77%
    1.
    Maximum output voltage is guaranteed to be 0.1% of the rated voltage at zero
    output setting, using the front panel or digital remote programming modes.
    2.
    Maximum output current is guaranteed to be 0.2% of the rated current at zero output setting, using the front panel or digital remote programming modes, and when measured with rated load resistance.
    3.
    Total output power is also based on AUX1 Output Voltage (5 V) and AUX1 Output Current (0.5 A) and AUX2 Output Voltage (15 V) and AUX2 Output Current (0.5 A).
    4.
    From 85–132 Vac or 170–265 Vac, constant load.
    5.
    From 85–132 Vac or 170–265 Vac, constant load.
    6.
    From no load to full load, constant input voltage.
    7.
    For load voltage change, equal to the unit voltage rating, constant input voltage.
    8.
    For 6 V models the current ripple is measured at 2–6 V output voltage and full output current. For all other models, the current ripple is measured at 10–100% output voltage and full output current.
    9.
    When using remote sense, the total of the load voltage and the load line drops must not exceed the rated output of the power supply. For example, for an XTR 6-110 in an application with 1 V of
    load line loss (0.5 V/Line), the maximum available load voltage would be 6–1= 5 V. Note: The unit may operate at higher output voltages than this, but there is no guarantee that the power supply
    will meet performance specifications. Ultimately, the upper limit of the output voltage will be determined by internal circuitry of the power supply (non-adjustable.)
    10.
    With rated, resistive load.
    11.
    At 100/200 Vac input voltage and maximum output power.
    Applies to all footnotes: Programming and Readback: RS-232, RS-485, USB built in. GPIB, Ethernet optional.
    Specifications are guaranteed from 1% to 100% of the rated output voltage, current, and power.
    Environmental Specifications (Indoor use)
    Operating Temperature Range
    32°F to 122°F, 100% load (0°C to 50°C)
    Storage Temperature Range
    -4°F to 158°F (–20° C to 70°C)
    Operating Humidity Range
    30–90% RH (no condensation)
    Storage Humidity Range
    10–95% RH (no condensation)
    Operating Altitude
    Up to 6,500 feet (2,000 m)
    Installation Category
    II (IEC 1010-1)
    Pollution Degree
    2 (IEC 1010-1)
     
     
    Regulatory Approvals
    Safety
    CSA 22.2 No. 61010-1 and UL61010-1. Marked with c(UL) us, CE EN61010-1
    EMC
    Complies with EN55022, Class B, FCC Part 15B for conducted emissions,
    Complies with EN55022, Class A, FCC Part 15A for radiated emissions,
    Complies with EN61000-4 series of standards for immunity
    Warranty
    Five Years
    Programming Mode APG ISOL Digital
    Voltage & Current Output Voltage Programming 0-100% Voltage control range is 0.0 to 2.0 - 10.0V in 0.1V increments  
    Voltage & Current Output Resistive Programming 0-100% Resistive control range is 0.0 to 2.0 - 10.0V in 0.1V increments  
    Output Voltage and Current Monitor 0-100% Output Voltage Monitor range is 0.0 to 2.0 - 10.0V in 0.1V increments  
    Voltage Programming Accuracy1 ± 0.5% of rated output voltage, max (0 to 4.0V / 4K Ohm range)
    ± 0.5% of rated output voltage, typical in other ranges    		 ± 0.1% of rated output voltage
    Current Programming Accuracy1 ± 0.5% of rated output current, max (0 to 4.0V / 4K Ohm range)
    ± 0.5% of rated output current, typical in other ranges    		 ± 0.2% of rated output current6
    Voltage Feedback Accuracy ± 1% of rated output voltage ± 0.1% of rated output voltage
    Current Feedback Accuracy ± 1% of rated output current ± 0.2% of rated output current
    Isolation (Prog and Readback Lines) With respect to chassis potential: 500 V With respect to:
    chassis potential: 500 V
    negative or positive main output 1500 V
    negative or positive auxiliary output 300 V    		  
    Parallel Operation Up to 4 units in master slave mode    
    Series Operation Up to 2 units (with external diodes)    
    Constant Voltage (CV) Constant Current (CC) Indicator CV: TTL High (4-5 V)
    CC TTL Low (0-0.6 V)    		    
    Shutdown Control2   Logic low 0.0 - 1.4 V
    Logic high 2.0 - 15 V
    Dry contact compatible    		  
    AUX On/Off Control   TTL level or dry contact compatible  
    Power Supply Status Signal   TTL high: OK (4-5 V)
    TTL low: fail (0-0.6 V)    		  
    Interlock Enable/Disable   Dry contact. Open/Short: On or Off programmable  
    1. Typical APG or isolated APG accuracy can be improved to max accuracy by user calibration at the specific range selected
    2. The shutdown input has user selectable negative logic operation via front panel or remote digital input/output
    AC Line Input Specifications
    Rated AC Input Voltage/Frequency 100–240 Vac, 47–63 Hz
    Operational AC Input Voltage/Frequency 85–265 Vac continuous, 47–63 Hz, single phase
    Input Current (at 100/200 Vac) 11.5/6 A (850 W)
    Inrush Current (100/200 Vac) Less than: 25 A (850 W)
    Power Factor Correction 0.99@100/200 Vac, rated output power
    Output Performance Specifications
    Temperature Coefficient 100 PPM/° C from rated output voltage, after a 30-minute warm-up
    Drift (8 hours) 0.05% of rated output voltage & current over an 8 hour interval with constant line, load & temperature, after a 30-minute warm-up
    Hold-up Time Typical 20 ms at any rated input line.
    Transient Response Time2 Less than 1 ms for 6 V to 60 V models. Less than 2 ms for 80 V to 600 V models
    Meter Accuracy 0.5% of actual output voltage or current ± 1 count
    Aux output1 +5 V: +0.4 V, – 0.5 V at 0.4 A
    +15 V: +1.2 V, – 1.4 V at 0.4 A
    Isolation
    AC Input to Output
    AC Input to Chassis
    Output to Chassis3    		 1350 Vac
    1350 Vac
    500 Vac
    1. Current: 0.51 A minimum guaranteed, 0.72 A typically available. Overcurrent protection (each output) is automatic, non-latching. When OCP is tripped the aux voltage folds back and will recover to nominal condition when the over current condition is removed (typ. <0.2A).
    To protect external circuits attached to the aux outputs it is recommended that customers use an appropriately rated fuse in series with the aux outputs set point 10-100%
    2. Time for the output voltage to recover within 0.5% at its rated output for a load change 10-90% of rated output current. Output set point 10-100%
    3. For floating chassis ground applications, please contact application engineering for system design assistance.
    Mechanical Specifications
    XG 850 Watt (W×H×D) 8.4 × 1.7 × 19.0 inch (214 × 43.6 × 483 mm)
    Weight 11 lb (5kg)
    Cooling Forced air cooling by internal fans

    • For sale in Mexico and Latin America



     Share your knowledge of this product with other customers... Be the first to write a review.



    Browse for more products in the same category as this item:

    Power supplies > DC power supplies


    Sorensen XG6-110 Programmable DC Power Supply, 0-6V, 0-110A, 670W. $1,299.00
    Signal Test
    7030 Alamitos Avenue, Suite B
    San Diego, CA 92154
    		 About Us
    		  Used Test Equipment
    		 Privacy Policy
    		 Send Us Feedback