Sorensen HPD30-10 DC Power Supply 300 W, 0-30 V, 0-10 A.

Home > Power supplies > DC power supplies >

Call For Price and Availability

Availability:: Usually Ships in 4 to 6 Weeks
Product Code: HPD 30-10

Description

Technical Specs

Datasheet PDF Format

Electrical Specifications

Models 15-20 30-10 60-5

Output ratings

Output Voltage 0-15 V 0-30 V 0-60 V

Output Current 0-20 A 0-10 A 0-5 A

Output Power 300 W 300 W 300 W

Line regulation

Voltage (0.01% of Vmax + 2 mV) 3.5 mV 5 mV 8 mV

Current (0.01% of Imax + 1 mA) 3 mA 2 mA 1.5 mA

Load regulation

Voltage (1% of Vmax + 2 count) 3.5 mV 5 mV 8 mV

Current (1% of Imax + 1 count) 3 mA 2 mA 1.5 mA

Meter accuracy

Voltage (1% of Vmax + 1 count). 0.25 V 0.4 V 0.7 V

Current (1% of Imax + 1 count) 0.3 A 0.2 A 0.06 A

Output noise and ripple

rms 5 mV 5 mV 7.5 mV

p-p (0-20 MHz) 100 mV 100 mV 100 mV

Drift (8 hours)

Voltage (0.02% of Vmax) 3 mV 6 mV 12 mV

Current (0.03% of Imax) 6 mA 3 mA 1.5 mA

Temperature coefficient

Voltage (0.0015% of Vmax/°C) 2.25 mV 4.5 mV 9 mV

Current (0.02% of Imax/°C) 4 mA 2 mA 1 mA

General Specifications

Operational AC input voltage Single unit: 104-127 VAC at 6 Arms; Dual Unit: 104-127 VAC at 12 Arms, 47-63 Hz

Switching frequency Nominal 100 kHz

Remote analog programming Voltage and current programming inputs (source must be floating):

0-10 V voltage sources.Input impedance (V and I): 20 k

Remote programming 0-10 VDC for 0-100% or rated voltage or current ±1.0%

Dimensions (HxWxD) 5.2 x 4.2 x 11.7” (134.7 x 109.2 x 297.3 mm)

Weight 7.7 lb (3.5 kg)

Warranty Five years

Regulatory approvals CE, CSA, UL

Note: Specifications are subject to change without notice.

Features

300 Watts with Near Linear Performance The Sorensen HPD Series provides 300 watts of reliable DC power in a quarter-rack wide chassis. The supplies are ideal for benchtop, ATE systems and OEM applications, where wide adjustment of output voltage or current is required in a compact package.

The HPD series uses switch-mode technology combined with linear post regulation to provide performance comparable to an all-linear design. The supplies have excellent line and load regulation with low noise and good transient response as a result of zero voltage ‘soft switching’ and Power Factor Correction (PFC). The series is available in singles and duals in a single package for benchtop use. Multiple units can be rack mounted in one to four unit configurations for up to four independent 300-watt outputs for systems applications.

Product Features

Low noise and ripple
Excellent line/load regulation
Constant voltage or constant current operation with automatic crossover and mode indication
Current limit
Front and rear outputs
Remote sense
LabVIEW® and LabWindows® drivers

Protection Features

Over voltage protection
Over temperature protection

Options

Analog programming interface card
RS-232 interface Card
GPIB interface card
GPIB-multichannel

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Power supplies > DC power supplies
Power supplies > DC power supplies > Less than 600 W power supplies
Brands > Sorensen
Power supplies
Brands