Features
Noise Com's noise diodes are the fundamental building blocks for analog noise systems. They are sorted for performance characteristics that enhance their broadband noise output and flat spectral response. All Noise Com noise diodes can deliver symmetrical white Gaussian noise and flat output power versus frequency *.
- Rohs compliant packaging
- Custom electrical testing available upon request
- Wide package variety with custom configurations
- NC100 & 200 series for audio and RF applications
- NC300 & 400 series for microwave applications
* Flatness and output power are dependent upon peripheral circuit characteristics
Noise Com's noise diodes are the fundamental building blocks of all noise systems. They are hand-picked for performance characteristics that make them ideally suited to broadband noise generation with flat response.
All Noise Com noise diodes deliver symmetrical white Gaussian noise and flat output power versus frequency. The diodes are burned-in for 168 hours, meet MIL-STD202, and are hermetically sealed. Noise Com noise diodes are available in a wide variety of package styles, and in special configurations on request.
The NC100
and NC200 Series diodes are designed for audio and RF applications. The NC300 and NC400 Series diodes are designed for microwave applications in which a 50-ohm impedance is required.
Typical small signal impedance of the NC300
and NC400 Series is 10-20 ohms when a diode is turned on. Typically the output level is higher at low frequencies with low currents. Driving the diodes with more current results in more output at higher frequencies.
Applications:
Built-in test equipment (BITE)
-
Dither circuitry for A/D converters
|
About us
