The instruments include many unique
features not generally available in other commercial power supplies on
1) Constant power operating envelope:
Provides higher currents at lower voltages. This means that one power
supply can do the job of two or three conventional supplies. No longer
to you need to buy both high current/low voltage and low current/high
voltage supplies to test a family of converters.
2) High Accuracy current readback:
This means that current shunts/mux/DMMs are no longer needed to measure
the converter's input current accurately which is critical to good
efficiency measurements. Therefore work benches and test systems are
less complex, less costly and can cover a wider range of converters.
3) DC Transients: The 62000P
provides programmable control over voltage and current rise and falls
times. This allows complex dc transients to be generated which are not
possible with conventional power supplies. Supports:
Automotive transient testing per ISO16750-2
Avionics - Mil-Std-704
Shipboard - DO-160
4) Output Trigger: The 62000P
provides output trigger timing and precision event capturing. Ideal for
ATE systems desiring to capture oscilloscope waveforms.
5) VID Control: Instruments
include 8 independent programmable TTL signals which can be used for VID
control or any general purpose logic controls.
6) Softpanels: Advanced Labview
graphical control panels allows for simple and efficient control and
data gathering for the 62000P supplies.