| Output Voltage AC :
0.05 ~ 5kV, DC : 0.05 ~ 6kV |
| Load Regulation 1% of setting + 5V |
| Voltage Regulation 2V |
| Voltage Accuracy 1% of setting + 5 count |
| Cutoff Current AC : 0.1~20mA,DC : 0.01 ~
5mA AC : 0.1 ~ 30mA, DC : 0.01 ~ 10mA |
| Current Resolution AC : 1μA, DC : 0.1μA |
| Current Accuracy 1% of setting + 5 count |
| Output Frequency 50Hz / 60Hz |
| Test Time 0.3 ~ 999 sec., continue |
| Ramp Time 0.1 ~ 999 sec., off |
| Fall Time 0.1 ~ 999 sec., off |
| Dwell Time 0.1 ~ 999 sec., off |
| Waveform Sine wave |
| Insulation Resistance Test |
| Output Voltage - DC : 0.05 ~ 1kV DC :
0.05 ~ 1kV DC : 0.05 ~ 1kV |
| Voltage Resolution - 2V 2V 2V |
| Voltage Accuracy - 5% of setting |
| + 5 count |
| 1.5% of setting |
| + 5 count 1.5% of setting + 5 count |
| IR Range - 1MΩ~50GΩ 1MΩ~50GΩ 1MΩ~10GΩ |
| Resistance Resolution - 0.1MΩ 0.1MΩ
0.1MΩ |
| Resistance |
| Accuracy |
| ≥ 500V |
| 1MΩ~1GΩ - 4% of setting |
| + 5 count |
| 5% of setting |
| + 5 count 5% of setting + 5 count |
| 1GΩ~10GΩ - 7% of setting |
| + 5 count |
| 10% of setting |
| + 5 count 10% of setting + 5 count |
| 10GΩ~50GΩ - 12%5% of setting |
| + 5 count |
| 15% of setting |
| + 5 count 15% of setting + 5 count |
| ≤ 500V 1MΩ~1GΩ - 7% of setting |
| + 5 count |
| 10% of setting |
| + 5 count 10% of setting + 5 count |
| ≤ 100V 1MΩ~1GΩ - 10% of setting |
| + 5count |
| Flashover (ARC) Detection |
| Setting Mode Programmable setting |
| Detection Current AC : 1mA ~ 15mA, DC :
1mA ~ 5mA AC : 1mA ~ 15mA, DC : 1mA ~ 10mA |
| Secure Protection Function |
| Fast Output Cut-off 0.4ms after NG
happen |
| Ground Fault Interrupt 0.5mA ±0.25mA AC,
ON/OFF |
| Panel Operation Lock Present password |
| Continuity Check 1Ω ± 0.2Ω, ON/OFF |
| GO/NG Judgment Window |
| Indication, Alarm GO : Short sound,
Green LED ; NG : Long sound, Red LED |
| Data Hold Least tests data memories |
| Memory Storage 50 instrument setups with
up to 20 test steps |
| Remote & Interface |
| Remote control Input : Start, Stop,
Interlock (at 11 pin terminal block only) ; Output : Under test, Pass, Fail |
| Communication Interface RS485 (Option)
RS232 (Standard), GPIB (Option). |
| General |
| Operation Environment Temperature :
0°C~40°C, Humidity : 15% to 95% R.H@≤40°C |
| Power Requirements 100V/120V/220V/240V
(AC ±10%), 50/60Hz |
| Power Consumption 300W 500W |
| Dimension (W x H x D) 270 x 105 x 350 mm
320 x 105 x 400 mm |
| Weight Approx.12 KG Approx.15 KG |
Videos (New)
