Features
Lab scope performance
- 500 MHz bandwidth
- 4 analog channels
- 4 GSa/s sample rate
- Standard 8 Mpts MegaZoom III deep memory
Engineered for the best signal visibility
- 12.1” XGA display with 256 levels of intensity shows subtle signal detail
- Industry’s-fastest uncompromised update rate of up to 100,000 waveforms/sec displays infrequent events
Wide range of application packages
- Serial decode including: I2C, SPI, CAN, LIN and RS-232/UART
- Segmented memory
- PC-based offline analysis and viewing of previously acquired data
- Power analysis
Agilent’s InfiniiVision DSO7054A, equipped with a 12.1” XGA display, comes in a quiet package that is just 6.5” deep, and weighs only 13 pounds. With the world’s fastest uncompromised update rate, up to 100,000 waveforms per second, see subtle signal detail and infrequent events other scopes miss. A wide range of application packages provide rapid measurement insight.
Agilent Technologies InfiniiVision 7000 Series Oscilloscopes
Engineered for the best signal visibility
Agilent engineers developed the Infi niiVision 7000 Series with advanced technology that will allow you to see more subtle signal detail and more infrequent events than any other scope on the market. See the Infi niiVision 7000 Series oscilloscope—the industry’s best for signal viewing.
The InfiniiVision 7000 Series offers bandwidths up to 1 GHz. Each model, equipped with a large 12.1” XGA LCD display, comes in an whisper-quiet package that is just 6.5” deep and weighs only 13 pounds.
What gives the InfiniiVision 7000 Series the best signal visibility?
1. Biggest display
Oscilloscopes are visual tools and large, high-resolution screens make the product better. Bigger displays have become increasingly important as general purpose scopes need more space to display digital and serial signals in addition to traditional scope channels.
The increased display size helps you easily view up to 20 channels simultaneously with serial protocol. At 12.1 inches the display is nearly 40% bigger than any competitive model.
2. Fastest architecture
See a display more representative of the actual signals under test than with any other scope. The InfiniiVision 7000 Series shows jitter, infrequent events, and subtle signal detail that other scopes miss. Turn knobs and the instrument responds instantly and effortlessly.
Need to also view digital channels? The instrument stays responsive. Decoding serial packets? Offering the industry’s only hardware-accelerated serial bus decode, Agilent’s Infi niiVision series delivers serial debug without compromising analog measurements.
3. Insightful applications
Customize your general purpose scope. A wide range of application packages provide meaningful insight into your application-specifi c problems.
Serial with hardware-accelerated decode
-
Segmented memory
-
Vector signal analysis
-
I2C, SPI
-
RS-232/UART
-
DSO/MSO offline analysis
-
Core-assisted FPGA debug
-
CAN/LIN
-
FlexRay
-
Power measurement
-
Secure environment
Your design has analog, digital and serial signals ... shouldn’t your scope?
The Infi niiVision 7000 Series scope channels provide faster identifi cation of your most elusive problems – Revolutionary high-resolution display.
Engineered with an XGA display and 256 levels of intensity grading, see a precise representation of the analog characteristics of the signals you’re testing. Equipped with the industry’s fastest uncomprimised update rate at 100,000 waveforms/sec update rate, you’ll capture critical signal detail and see infrequent events that traditional scopes miss.
MegaZoom III technology. MegaZoom III responsive deep memory captures long, nonrepeating signals and maintains high sample rates, allowing you to quickly zoom in on areas of interest. Sample rate and memory depth go handin-hand. Deep memory in oscilloscopes sustains a high sample rate over longer time spans.
Capture a mix of analog or digital signals. Compare multiple cycles of digital signals with slower analog signals – 16 high-speed timing channels with up to 2 GSa/s deep memory. Use the timing channels to evaluate control signal relationship.
Or capture and view data buses up to 16 bits wide.
Trigger on and display individual signals or bus waveforms in hex or binary.
Mixed signal trigger.
Trigger across any combination of analog and digital signals simultaneously.
See precise analog measurements timed with exact digital content, all in one box.
Applications for digital channels.
Designing with Altera or Xilinx FPGAs? Use the FPGA dynamic probe for rapid internal FPGA measurements.
Using I2C, SPI, or RS-232? Use the analog or digital signals from a 4-channel model to acquire and decode these serial buses.
Capture long streams of serial data and gain fast insight into your problems. Agilent 7000 Series oscilloscopes provide the best serial protocol capabilities in their class – Serial bus triggering and decoding.
-
Display responsive, on-screen decode of serial bus traffic.
-
Isolate specifi c events with pinpoint accuracy.
-
Show decode to validate serial bus activity in real time.
Quickly find infrequent errors. Hardware-accelerated decoding increases your probability of capturing elusive events. Agilent oscilloscopes can help you catch that intermittent problem before it becomes an intermittent customer complaint or quality concern.
Other useful features
High resolution mode.
Offers up to 12 bits of vertical resolution in real-time, single-shot mode.
This is accomplished by serially fi ltering sequential data points and mapping the fi ltered results to the display when operating at time base settings greater than 10-µs/div.
Help is at your fingertips.
An embedded help
system – available in 11 languages – gives you quick answers if you don’t understand a feature.
Simply press and hold the corresponding frontpanel key, and a screen pops up to explain its function.
Waveform math with FFT.
Analysis functions include subtract, multiply, integrate, square root, and differentiate, as well as fast Fourier transforms (FFT).
Peak detect.
250 ps on 500-MHz and 1-GHz models, 500 ps on 350-MHz models. Helps you fi nd narrow glitches.
AutoProbe interface.
Automatically sets probe attenuation factors and provides power for selected active probes, including the awardwinning 1130A 1.5-GHz Infi niiMax differential active probe and 1156A 1.5-GHz single-ended active probe systems.
5-digit hardware counter.
Measures frequency up to the bandwidth of the scope and provides accurate and repeatable results. Can be increased
to 8 digits with an external 10 MHz reference.
Trig Out and Reference Clock In/Out.
Provides an easy way to synchronize your scope to other instruments. Use the Trig Out port to connect your scope to a frequency counter for more accurate frequency measurements or to cross trigger other instruments.
Autoscale. Displays all analog and digital active signals, and automatically sets the vertical, horizontal and trigger controls.
23 automatic measurements with QuickMeas.
Pressing [QuickMeas] brings up the last four automated measurements selected. Cursors automatically track the most recently selected measurement.
Analog HDTV/EDTV trigger. The 7000 Series comes standard with analog HDTV/EDTV triggering for standards like 1080i, 1080p, 720p and 480p as well as standard video triggering on any line within a fi eld, all lines, all fi elds and odd or even fi elds for NTSC, SECAM, PAL and PAL-M video signals.
Bus mode display (on MSO models).
Quick and easy read-out of hexadecimal or binary representation of logic signals.
Easy software upgrades. System software is stored in fl ash ROM that can be upgraded from the scope’s built-in USB port or LAN.
Why does a fast update rate matter?
While bandwidth, sample rate and memory depth are key criteria for deciding which scope to purchase, an equally important characteristic is update rate.
What is update rate? Update rate is how many waveforms acquisitions per seconds you scope can acquire, process, and display. Oscilloscope “dead-time” is the time it takes for a scope to process and then display an acquired waveform before re-arming it’s triggering for the next acquisition. For traditional scopes, this time is often orders of magnitude greater than acquisition time on fast time-per-division settings.
If a glitch occurs during the scope’s dead-time, it won’t be captured. The key to improving the probability of capturing a signal anomaly during the scope acquisition time is to minimize dead-time.
Oscilloscope vendors usually specify what their scope’s “best-case” waveform update rates are. Some scope architectures suffer from factors that can seriously degrade the “best-case” update rates spec. Agilent’s 7000 Series architecture delivers the world’s fastest update rate when using:
-
Analog channels
-
Analog and digital
-
Deep memory
-
Serial decode
Why is update rate important?
Responsiveness. If you rotate the timebase control, you expect the oscilloscope to respond immediately – not seconds later after the scope fi nishes processing data.
Signal detail. Fast waveform update rates improve the display quality of the waveform that you see on screen.
Certainty. Fast waveform update rates improve the scope’s probability of capturing random and infrequent events.
Update rates directly affect a scope probability of capturing and displaying infrequent and random events. Slow update rates will cause a scope to miss subtle or infrequent signal details.
How update rate affects signal visibility
Capturing random and infrequent events on an oscilloscope is all about statistical probabilities. The key to improving the probability of capturing a signal anomaly is to minimize dead-time and take more pictures of the signal in a given timeframe. Agilent scopes both connected to a target with a glitch that occurs 25 times per second.
Software applications
I2C/SPI serial trigger and decode (N5423A or Option LSS on new scope purchases)
This application displays real-time time-aligned decode of I2C and SPI serial buses. Hardware-accelerated decode means the scope stays responsive and fast.
This application requires a 4-channel DSO or 4-channel MSO and can use any combination of the scope or logic acquisition channels.
RS-232/UART serial decode and trigger (N5457A or Option 232 on new scope purchases)
Does your design include RS-232 or another type of UART? This application eliminates the need to manually decode bus traffi c. Using data captured on the scope or logic channels, the application lets you easily view the information sent over a RS-232 or other UART serial bus.
Display real-time time-aligned decode of transmit and receive lines. The application also enables triggering on RS-232/UART conditions.
This application requires a 4-channel DSO or 4-channel MSO and can use any combination of the scope or logic acquisition channels.
CAN/LIN triggering and decode (N5424A or Option AMS on new scope purchases)
Trigger on and decode serially transmitted data based on CAN and LIN protocols. This application not only provides triggering on complex serial signals, but it also provides unique hardwareaccelerated capabilities. Hardware-accelerated triggering and decode means the scope stays responsive and fast.
This application requires a 4-channel DSO or 4-channel MSO and can use any combination of scope or logic acquisition channels.
FlexRay triggering and decode (N5432A or Option FRS on new scope purchases)
FlexRay protocol is based on time-triggered and deterministic architecture. Agilent’s FlexRay solution for the 7000 Series mixed signal oscilloscopes offers a robust set of FlexRay frame, slot, and error triggering, including the ability to trigger on specifi c FlexRay communications qualifi ed on base-cycle and cycle-repetition. This solution combines an Agilent 7000 Series mixed signal oscilloscope (MSO) with an Agilent VPT 1000 vehicle protocol tester for FlexRay protocol analyzer.
This application requires a 4-channel MSO.
FPGA dynamic probe application (N5406A for Xilinx, N5434A for Altera)
Give your MSO internal FPGA visibility. Agilent’s MSO FPGA dynamic probe provides internal FPGA visibility and quick instrument setup using an innovative core-assisted debug approach.
Measurement tasks that previously took hours can be done in a few mouse clicks. In a few seconds, easily measure a different set of internal signals without changing your FPGA design.
Vector signal analysis software (89601A)
Expand the measurement capability of your scope with the 89601A vector signal analysis software.
This advanced DSP based software takes the digitized signal data provided by the scope and provides FFT based spectrum analysis and wide bandwidth digital modulation analysis for wireless communication signals like WCDMA and cdma2000, and wireless networking signals like 802.11 WiFi and 802.16 WiMaxTM.
Take advantage of the super wide bandwidth of your scope to capture and evaluate radar signals.
Segmented memory (N5454A or Option SGM on new scope purchases)
Segmented memory optimizes available memory for data streams that have long dead times between activity. The application excels at analyzing signal activity associated with laser pulses, serial buses, and bursty signals such as radar. View an overlay of all signal segments, including MSO channels and serial decode, while highlighting the current segment.
Quickly move between segments to view signal detail associated with a specific segment.
Power application (U1881A)
Need to make power measurements with your scope? Agilent’s power application provides a full suite of power measurements that run on a PC connected to an Infi niiVision 7000 Series oscilloscope. Make more accurate power supply efficiency measurements by using an U1880A deskew fi xture to deskew your voltage and current probes.
Agilent InfiniiVision 7000 Series oscilloscopes: Engineered for the best signal visibility
-
12.1” large display makes it easier to view analog, digital and serial signals.
-
High-resolution color display with XGA resolution and 256 levels of intensity reveals subtle details that most scopes won’t show you.
-
Free IntuiLink data capture PC software makes transferring waveform data or a screen image to a PC fast and easy. Built-in Web viewer via LAN allows for remote measurements and viewing.
-
Built-in help in eleven languages – Simply press and hold the front-panel key of interest for a few seconds, and a help screen pops up to explain its function.
-
Built-in 10-MHz reference in/out port synchronizes multiple measurement instruments in a system.
-
Standard USB and LAN ports provide PC and printer connectivity.
-
Built-in USB port makes it easy to save your work and update your system software quickly.
-
Trig Out port provides an easy way to synchronize your scope to other instruments.
-
An XGA video output port allows you to connect to a large external monitor.
-
Quickly pan and zoom for analysis with MegaZoom III’s instant response and optimum resolution.
-
Save screen images to a connected USB storage device.
-
Standard serial triggering includes I2C, SPI, and USB (optional CAN/LIN, RS-232/UART, and FlexRay advanced triggering and decode).
-
Standard analog HDTV/EDTV triggering supports triggering on 1080i, 1080p, 720p, and 480p HDTV/EDTV standards.
-
Digital channel buttons provide quick set-up access.
-
Intensity knob allows you to see the right level of waveform detail, just like an analog scope.
-
QuickMeas shows up to four automated measurements with the push of a button.
-
AutoProbe interface automatically configures the attenuation ratio of the probe and provides probe power for Agilent’s active probes.
-
Autoscale lets you quickly display any analog or digital active signals, automatically setting the vertical, horizontal and trigger controls for the best display, while optimizing memory.
-
Dedicated front panel controls make it easy to access the most common scope controls, including vertical and horizontal scaling.
Probes and accessories
Agilent offers a complete family of innovative passive and active probes for the InfiniiVision 7000 Series scopes helps you get your job done easily and accurately. Choosing the correct probe for your application will help to ensure you accurately acquire signals. Below is a general guide on how to choose the type of probe.
Software applications and other accessories
Offline viewing and analysis (B4610A)
Need to view and analyze scope data away from your scope? Need to share measurement data with geographically dispersed team members? Save your scope data to a USB or network drive and import the data into a PC-based offl ine viewer.
Pan and zoom. Use searching and fi ltering to gain insight on analog and digital buses. Email the data to team members who can use the same tool at their PCs.
Secure environment mode (Option SEC)
Option SEC – secure environment mode provides the highest level of security by ensuring internal nonvolatile memory is clear of all setup and trace settings in compliance with National Industrial Security Program Operation Manual (NISPOM) Chapter 8 requirements. When this option is installed, it will store setup and trace settings to internal volatile memory only.
Volatile memory will be cleared during the power off cycle of the instrument. So you can move the instrument out of a secure area with confidence.
Evaluation kit (N2918A)
The evaluation kit includes a variety of signals that demonstrate MegaZoom III technology with its fast deep memory, superior waveform update rate, high defi nition display and mixed analog, digital and serial abilities.
Using this scope evaluation kit along with the easy-to-follow user’s guide, you can quickly become familiar with how to effectively operate an Infi niiVision 7000 Series scopes.
Soft carrying case (N2733A)
Need to travel with your oscilloscope? Agilent’s soft carrying case provides a convenient method that includes cushioning as well as a storage pouch. The soft carrying works equally well for storing the oscilloscope with its probes and accessories.
Connectivity
The 7000 Series scopes come with the most comprehensive connectivity tools in their class.
LXI class C
LAN eXtensions for Instrumentation (LXI) is a standards-based architecture for test systems. By specifying the interaction of system components, LXI enables fast and effi cient test system creation and reconfi guration.
The 7000 Series oscilloscopes follow specifi ed LAN protocols and adhere to LXI requirements such as a built-in Web control server, IVI-COM driver, and easy-to-use SCPI commands. The standard Agilent I/O Library Suite makes it easy to confi gure and integrate instruments in your system.
IntuiLink toolbars and IntuiLink Data Capture
IntuiLink gives you a quick way to move oscilloscope screen shots and data into Microsoft® Word and Excel.
ViewScope logic analyzer and oscilloscope correlation
ViewScope enables simple and free time-correlated measurements between a 7000 Series oscilloscope and an Agilent 16900, 16800, 1690, or 1680 Series logic analyzer. Scope and logic waveforms are integrated into a single logic analyzer waveform display for easy viewing analysis – all with a simple point-to-point LAN connection. You can also cross-trigger the instruments, automatically de-skew the waveforms, and maintain marker tracking between the instruments.
National Instrument drivers
InfiniiVision 7000 Series oscilloscopes are supported by LabVIEW plug-and-play and IVI-C drivers.
Agilent InfiniiVision Portfolio
Agilent’s InfiniiVision lineup includes 5000, 6000 and 7000 Series oscilloscopes. These share a number of advanced hardware and software technology blocks. Use the following selection guide to determine which best matches your specific needs.
Ordering information
Model: DSO7032A, Bandwidth: 350 MHz, Sample rate: 2 GSa/s, Memory depth: 8 Mpts, Scope channels: 2
Model: DSO7034A, 350 MHz, Sample rate: 2 GSa/s, Memory depth: 8 Mpts, Scope channels: 4
Model: MSO7032A, 350 MHz, Sample rate: 2 GSa/s, Memory depth: 8 Mpts, Scope channels: 2, Digital channels: 16
Model: MSO7034A, 350 MHz, Sample rate: 2 GSa/s, Memory depth: 8 Mpts, Scope channels: 4, Digital channels: 16
Model: DSO7052A, 500 MHz, Sample rate: 4 GSa/s, Memory depth: 8 Mpts, Scope channels: 2
Model: DSO7054A, 500 MHz, Sample rate: 4 GSa/s, Memory depth: 8 Mpts, Scope channels: 4
Model: MSO7052A, 500 MHz, Sample rate: 4 GSa/s, Memory depth: 8 Mpts, Scope channels: 2, Digital channels: 16
Model: MSO7054A, 500 MHz, Sample rate: 4 GSa/s, Memory depth: 8 Mpts, Scope channels: 4, Digital channels: 16
Model: DSO7104A, 1 GHz, Sample rate: 4 GSa/s, Memory depth: 8 Mpts, Scope channels: 4
Model: MSO7104A, 1 GHz, Sample rate: 4 GSa/s, Memory depth: 8 Mpts, Scope channels: 4, Digital channels: 16
Accessories included:
| Model number |
DSO70xxA |
MSO70xxA |
| Standard 3-year warranty |
• |
• |
| 10073C or 1165A 10:1 divider passive probe per scope channel |
• |
• |
| 16 channel flying lead set logic probe (two pods with eight channels each) |
|
• |
| Built-in help language support for English, French, German, Russian, simplified Chinese, traditional Chinese, Korean, Spanish, Portuguese,Japanese and Italian |
• |
• |
|
Printed user’s guide (option ABA for English, option AB2 for simplified Chinese, option ABJ for Japanese) |
• |
• |
| Documentation CD (PDFs of Programmer’s Quick Start Guide, Programmer’s Reference Guide, User Guide, and Service Guide) |
• |
• |
| Agilent I/O libraries suite 15.0 |
• |
• |
| Localized power cord |
• |
• |
|
Front panel cover |
• |
• |
Options
DSO to MSO upgrade*
N2735A for DSO703xA.
N2736A for DSO705xA.
N2737A for DSO710xA.
SEC
Secure Environment Mode - Provides compliance with National Industrial Security
Program Operating Manual (NISPOM) Chapter 8 requirements
(factory-installed option only for new purchase)
A6J
ANSI Z540 compliant calibration
*Includes a 54620-68701 logic cable kit, a label and an upgrade license to activate the MSO features. Installs in less than 5 minutes.
Serial data analysis applications
Option number – user installed: N5424A, Option number – factory installed: AMS, Description: CAN/LIN automotive triggering and decode (4 and 4+16 channel models only)
Option number – user installed: N5423A, Option number – factory installed: LSS, Description: I2C/SPI serial decode option (for 4/4+16 channel models only)
Option number – user installed: N5432A, Option number – factory installed: FRS, Description: FlexRay automotive triggering and decode (4+16 channel models only and required VPT1000)
Option number – user installed: N5457A, Option number – factory installed: 232, Description: RS-232/UART triggering and decode (4 and 4+16 channel models only)
User installed PC-assisted applications Description
N5406A, FPGA dynamic probe for Xilinx (MSO models only)
N5434A, FPGA dynamic probe for Altera (MSO models only)
B4610A, Offline viewing and analysis of MSO/DSO data on a PC
U1881A, Power measurement and analysis application
Option number – user installed: N5454A, Option number – factory installed: SGM, Description: Segmented memory
Accessories
Product number: N2733A, Description: Soft carrying case for 7000 Series oscilloscope
Product number: N2732A, Description: Rackmount kit for 7000 Series oscilloscope
Product number: GemStar 5000, Description: Transit case with foam molding customized for InfiniiVision 7000 Series available from GemStar.
For sale in Mexico and USA Border Towns.
|
About us
