Features
The 33220A function generator offers 11 standard waveforms plus pulse and arbitrary waveforms - it is the most frequency stable and lowest distortion function generator in its class.
- 20 MHz sine and square waveforms
- Ramp, triangle, noise, and DC waveforms
- Pulse generation with variable edge
- 14-bit, 50 MSa/s, 64 Kpoint arbitrary waveforms
- AM, FM, PM, FSK, and PWM modulation types
- Linear & logarithmic sweeps and burst operation modes
- Graph mode for visual verification of signal settings
- IntuiLink software plus USB, GPIB and LAN interfaces included
- Option 001 provides multiple-unit link for synchronous channels
-
LXI Class C Compliant
Uncompromising performance for functions and waveforms
The Agilent Technologies 33220A Function/Arbitrary Waveform Generator uses direct digital synthesis (DDS) techniques to create a stable, accurate output signal for clean, low distortion sine waves. It also gives you square waves with fast rise and fall times up to 20 MHz and linear ramp waves up to 200 kHz.
Pulse generation
The 33220A can generate variable-edge-time pulses up to 5 MHz. With variable period, pulse width, and amplitude the 33220A is ideally suited to a wide variety of applications requiring a flexible pulse signal.
Custom waveform generation
Use the 33220A to generate complex custom waveforms. With 14-bit resolution, and a sampling rate of 50 MSa/s, the 33220A gives you the flexibility to create the waveforms you need. It also lets you store up to four waveforms in nonvolatile memory.
The Agilent IntuiLink Arbitrary
Waveform software allows you to easily create, edit, and download complex waveforms using the waveform editor.
Or you can capture a waveform using IntuiLink for Oscilloscope and send it to the 33220A for output.
Easy-to-use functionality
Front-panel operation of the 33220A is straight-forward and user friendly. You can access all major functions with a single key or two. The knob or numeric keypad can be used to adjust frequency, amplitude, offset, and other parameters. You can even enter voltage values directly in V
pp, Vrms, dBm, or as high and low levels. Timing parameters can be entered in Hertz (Hz) or seconds.
Internal AM, FM, PM, FSK, and PWM modulation make it easy to modulate waveforms without the need for a separate modulation source. Linear and logarithmic sweeps are also built in, with sweep rates selectable from 1 ms to 500 s. Burst mode operation allows for a user-selected number of cycles per period of time. GPIB, LAN, and USB interfaces are all standard, plus you get full programmability using SCPI commands.
External frequency reference
(Option 001)
The 33220A external frequency reference lets you synchronize to an external 10 MHz clock, to another 33220A, or to an Agilent 33250A. Phase adjustments can be made from the front panel or via a computer interface, allowing precise phase calibration and adjustment.
Selection Guide for Agilent Function / Arbitrary Waveform Generators
|
|
|
|
|
|
Frequency range
(sine, square) |
100 µHz to 15 MHz |
1 µHz to 20 MHz |
1 µHz to 80 MHz |
|
Standard waveforms |
Sine, square, triangle, ramp, noise, sin(x)/x, exponential rise and fall, cardiac, dc volts |
Sine, square, pulse, triangle, ramp, noise, sin(x)/x, exponential rise and fall, cardiac, dc volts |
Sine, square, pulse, triangle, ramp, noise, sin(x)/x, exponential rise and fall, cardiac, dc volts |
|
Arbitrary waveforms |
8 to 16,000 points |
2 to 64 K-points |
1 to 64 K-points |
|
Sample rate |
40 MSa/s |
50 MSa/s |
200 MSa/s |
|
Modulation |
AM (int/ext), FM (int), FSK (int/ext), burst (int/ext) |
AM, FM, PM, FSK, PWM, sweep and burst
(all internal/external)
|
AM, FM, FSK, burst (all internal/external) |
|
Sweep |
Linear or logarithmic; up or down |
Linear or logarithmic; up or down |
Linear or logarithmic; up or down |
|
External clock reference |
Optional External lock range:
10 MHz ± 50 Hz
Internal frequency: 10 MHz |
Optional External lock range:
10 MHz ± 500 Hz
Internal frequency: 10 MHz
|
Standard External lock range:
10 MHz ± 35 kHz
Internal frequency: 10 MHz |
|
Connectivity
(Intuilink Software included)
|
GPIB, RS-232 |
GPIB, USB, LAN |
GPIB, RS-232 |
|
Warranty |
1 year |
1 year |
1 year |
--RACK MOUNTING--
|
|
|
|
|
|
|
|
Rack Mount Kit: 34190A - OR - Option #1CM |
Rack Mount Kit: 34190A - OR - Option #1CM |
Shelf Kit: 5063-9255 Slide Kit: 1494-0015 Filler Panel: 5002-3999 |
*In order to prevent overheating, do not block the flow of air into or out of the instrument. Be sure to allow enough clearance at the rear, sides, and bottom of the instrument to permit adequate internal airflow. |
Two Adjacent Instruments (equal depths) |
Lock-link Kit: 5061-9694 Flange Kit: 5063-9212 |
Lock-link Kit: 5061-9694 Flange Kit: 5063-9212 |
Shelf Kit: 5063-9255 Slide Kit: 1494-0015 |
*The Lock-link kit works only for instruments of equal depth. If you want to mount an Agilent 33220A and an instrument of a different depth, |
For Sale in Mexico and USA border Towns.
|
About us
